Hisense N3000 - About TV Menu Options; System Information and Disclaimer; Software Upgrade and Reset

13
System Information: View system information.
Disclaimer: Read the Legal Disclaimer.
Upgrade: You can manually check the new version. If there is new version,
click on the Start update icon to download the files. When the download
finished, the TV restarts. Then the software upgrade begins. When the upgrade
finished, the TV restarts.
Reset TV: Restore your TV back to the factory default.
Basic Features
• HDMI ARC: Select the TV speaker or an ARC device for sound output.
• HDMI 2.0 Format: Match the connected device output format. Select Enhanced for devices of 4K, 60Hz,
4:4:4, 4:2:2 or 4:2:0, 10 bit and above.
• Detect: Search all the device connected to the TV.
NOTES
• HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
• The HDMI CEC feature of the connected device must be turned on.
• If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features
do not work.
• Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
Advanced Settings: Access the Advanced Settings menu.
• PVR&Time-Shift Settings:
Select Disk: Select the disk where you want to store your recorded content.
Select Partition: Select the partition where you want to store your recorded content.
Timeshift Size: Select the Time Shift size.
Format: Format the selected disk.
Speed Check: This shows you the transfer rate of your storage device.
• Network Wake Up: When this feature is turned on, you can wake up your TV from Netflix or YouTube on
other device, such as your tablet or phone.
• Setup Wizard: Use the Setup Wizard for instructions to help you set up your TV.
• Store Mode: Set the TV to use in Store Mode or not.
Using the About TV Menu
System Information
Disclaimer
Upgrade
Reset TV
About TV