Restarting BMC
If the remote console cannot be started or the remote console function
cannot be used, execute the recovery procedure of Troubleshooting problems
on page 4-2.
If the problem is not resolved by executing the recovery procedure described
in Troubleshooting problem, restarting BMC may solve the problem. You can
restart BMC as follows:
•
In the Web console of management module, click Resources tab >
Modules > All modules > Server blade > Server blade x > BMC tab
> BMC restart.
• In the CLI console of management module, execute the bmc-reset blade
command.
Troubleshooting
4-5
Hitachi Compute Blade 500 Series Remote Console User's Guide
To Next Page
Loading...
