Status Monitor <Only for CP-X8160, CP-WX8250 and CP-WU8450>
In error state
The Status Monitor displays a warning of an error
with larger letters. Resolve the errors referring to the
table of the sections "Related messages" (117) and
"Regarding the indicator lamps" (118, 119) when the
warning is displayed.
Displayed warnings are as below;
COVER: The lamp cover has not been properly xed.
Refer to the LAMP indicator blinking in the table (
118).
FAN: The cooing fan is not operating.
Refer to the TEMP indicator blinking in the table (
119).
LAMP: The lamp does not light.
Refer to the LAMP indicator lighting in the table (
118).
TEMP: The projector's interior becomes over heated.
Refer to the TEMP indicator lighting in the table (
119).
AIR (AIR FLOW): The internal temperature is rising.
Refer to the description of the message, "CHECK THE AIR FLOW" in the
table (
117).
COLD: There is a possibility that the interior portion has become over cooled.
Refer to the LAMP and TEMP indicators alternatively blinking in the table
(
119).
FILTR (FILTER): It is time to clean the air lter.
Refer to the LAMP and TEMP indicators simultaneous blinking in the table
(
119).
• When one of the warnings of FAN, LAMP, COVER, TEMP errors is
displayed, the backlight blinks at the same time.
NOTE
Displaying the condition of the projector (continued)
: Displays peripheral temperature in Celsius. While the lamp is on,
supplied voltage is also displayed.
3rd line: Displays supplied voltage and peripheral temperature in
Celsius while the lamp is on.
3rd line
• While the projector is searching an input signal or USB TYPE A ports
are selected in normal condition, nothing is displayed on the 2nd line of the
monitor.
• When the USB TYPE B port is selected even if MOUSE is selected in the
USB TYPE B item of the OPTION menu, "NO SIGNAL" is displayed on the 2nd
line of the monitor (
65).
• Displayed temperature might differ from actual peripheral temperature
because the displayed temperature is measured inside of the projector.
NOTE
example
O RC EV
To Next Page
Loading...
