How to Use This Instruction Manual
■ Model Number Nomenclature
● This Instruction Manual covers the standard models of the Hitachi DSP air compressor.
● This Instruction Manual intended to assist daily operators and maintenance personnel
in the installation, operation, control and service of the Hitachi DSP air compressor.
● Prior to operation of this air compressor, ensure that all operators read and understand
this INSTRUCTION MANUAL completely, thereby operating it safely and properly.
Place the INSTRUTION MANUAL near the air compressor to make it available at any
time, and refer to it as the need arises.
● If there are any questions or comments, please contact the local Hitachi distributor or
the nearest Hitachi office.
●
Fill your DSP’s model name, Serial Number, etc. into the back cover of this Instruction Manual.
Such information may be helpful when ordering parts, periodic maintenance, and overhaul.
● Hitachi may make improvements and/or changes in the products described in this publication at any time without notice.
DSP-160VW6N
Dry or Oil-Free Rotary
Screw Air Compressor
Packaged
N-Type (NEXT Series)
Frequency (6: 60 Hz)
W: Water-Cooled
w/ V: VSD, w/o V: Fixed
Motor Output (kW)
WARNING
Never remove a protective device from the air compressor or modi-
fy the air compressor.
It is imperative to install an earth leakage (ground) circuit breaker
on the power cable. This prevents a ground fault accident.
DSP air compressors are not designed, intended or approved for
breathing air applications. Hitachi does not approve specialized
equipment for breathing air applications and assumes no responsi-
bility or liability for compressors used for breathing air services.
To Next Page
Loading...
Need help?
General
