EasyManuals Logo

Hitachi DSP-160V6WN User Manual

Hitachi DSP-160V6WN
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
84
10. PRECAUTIONS WHEN THE COMPRESSOR IS TO BE IDLE FOR AN EXTENDED PERIOD OF TIME
If the compressor is not to be used for a week or
more, be sure to press the UNLOAD STOP button on
the instrument panel.
The compressor then unloads for 5 minutes and auto-
matically stops when the compressor and its piping
are dry.
To prevent the inside of the compressor from rusting,
press the UNLOAD STOP button and dry the com-
pressor for 5 - 10 minutes a week.
Be sure to turn off the power if the compressor is not
to be used for an extended period of time.
Failure to take measures to prevent rust could result in rusting due to humidity in the atmosphere or
lack of oil film in the bearings, and could cause the compressor to freeze up or could result in
damage to the bearings when operation is restarted.
The UNLOAD STOP button is not only used when the compressor is to be idle for an extended period
of time; it is also effective way to prevent the inside of the compressor from rusting during routine
operation as well.
Unloading the compressor prior to stopping enables
moisture in the second stage air end to be removed.
Drying out the inside of the compressor is an effective
way to prevent rust from developing in the second stage
air end when unused for an extended period of time.
IMPORTANT
モニタ
メニュー
リセッ
遠方
機能
電源
停止
運転状況
故障
運転管理
負荷
遠方
起動待ち
設定
自動
UP/ 
DOWN
警報
記憶
表示切替/
イド ード
+/−
AUTO
MONITOR
MENU
SET
SELECT/WIDE
2
RUNNINGCONTROL
STARTREMOTE
1
FUNC
[× 10h
ALARM
STR
REMOTE
RUNNINGMODE
AUTOSTART
POWER
LOAD
RESET
SHUTDOWN
STOP
MONITOR
UNLOAD STOP
UNLOAD STOP button
Performing unload stop during dual/
backup operation and/or multiple unit
control operation (optional)
If the compressor is to be idle for an extended period
of time, turn off dual/backup operation and/or multiple
unit control operation, press the UNLOAD STOP
button while the compressor is running and dry out
the compressor.
The UNLOAD STOP button is effective when opera-
tion control is set to “SINGLE.” For information on
operation control settings, see page 19.)
When restarting operation, return the operation con-
trol to the optional control settings.
CAUTION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi DSP-160V6WN and is the answer not in the manual?

Hitachi DSP-160V6WN Specifications

General IconGeneral
BrandHitachi
ModelDSP-160V6WN
CategoryAir Compressor
LanguageEnglish

Related product manuals