What does 'Cannot combine scene of multiple programs' mean on my Hitachi DZ-GX5080A?
If your Hitachi Camcorder displays 'Cannot combine scene of multiple programs', it means you are trying to combine scenes from different programs. First, create a play list, and then combine the scenes on it.
What to do if my Hitachi Camcorder says 'CHECK DISC'?
If your Hitachi Camcorder displays 'CHECK DISC', it may be because the disc is dirty, scratched, or distorted. Clean the disc, or if it's damaged, replace it with a new one. Also, ensure that the disc type is compatible with your camcorder.
What to do if my Hitachi Camcorder says 'Card full'?
If your Hitachi Camcorder displays 'Card full', it means the recording capacity of the card has reached its limit. You can either replace the card with a new one or delete unnecessary stills to free up space.
What does 'Disc error has occurred' mean on my Hitachi DZ-GX5080A Camcorder?
If your Hitachi Camcorder shows 'Disc error has occurred', it might be due to a dirty disc. Clean the disc. It could also be because the disc has been edited on another device, causing a data mismatch. In this case, format the disc (this will erase all data) or replace it.
Why does my Hitachi Camcorder show 'Card error'?
If your Hitachi Camcorder displays 'Card error', it could be because the card terminals are dirty. Try cleaning them with a dry cloth. It can also appear if data other than photos is recorded on the card, in which case you should replace the card.
Why does my Hitachi Camcorder display 'COPY PROTECTED'?
If your Hitachi Camcorder displays 'COPY PROTECTED', it means you are trying to record a copy-guarded image. Copy-guarded images cannot be recorded on the DVD video camera/recorder. Stop trying to record.
Why does my Hitachi DZ-GX5080A display 'CANNOT RECORD PHOTOS'?
If your Hitachi Camcorder displays 'CANNOT RECORD PHOTOS', it means you are trying to record stills on a DVD-RW/DVD-R/+RW. Still images cannot be recorded on these disc types. Use a DVD-RAM or card when recording photos.
Why does my Hitachi DZ-GX5080A display 'Cannot replace thumbnail on PHOTO scenes'?
If your Hitachi Camcorder displays 'Cannot replace thumbnail on PHOTO scenes', it means you are trying to change a photo thumbnail in the scene editing menu. The thumbnail of a still image cannot be changed. Select a movie to change the thumbnail.
Why does my Hitachi DZ-GX5080A Camcorder say 'Cannot combine. Deselect PHOTO scenes'?
If your Hitachi Camcorder displays 'Cannot combine. Deselect PHOTO scenes', it means you're trying to combine scenes when a photo is selected. Only video scenes can be combined, so select only video scenes or stop trying to combine scenes.
What to do if my Hitachi DZ-GX5080A Camcorder says 'Data error in a part of image file'?
If your Hitachi Camcorder displays 'Data error in a part of image file. Repair data now? YES NO', it could be because the disc is dirty, so first check for dirt. This message also appears if writing to the file was interrupted, like if the power was turned off during recording. Choose 'YES' to attempt automatic repair. Choosing 'NO' will prompt you to verify initialization.
To Next Page
General