3 - 2
Description of Operation > Description of Structure / Description of Newly Adapted Technology
Fig. 3-1-1 Confi guration of circuit boards and their mounting locations
(a)
(b)
(c)
(d)
(h)
(j)
(e)
(f)
(g)
(i)
3-2
Description of Newly Adapted Technology
3-2-1 LED Light
The DZ-GX5080A incorporates an LED light that uses two highly luminous and long-life white
light-emitting diodes (LED), in place of the fl ash that is mounted in some conventional models.
The fl ash was effective only when recording stills, whereas the LED light can also be used when
recording movies, and the assist light function
(*1)
that has been featured in conventional models can
be used at the same time.
The LED light is turned on/off by pressing the
button, allowing you to record a subject in dark
places up to 1.5 m (4.9 feet) away.
*1: Specify “Program AE: Low Light”, and turn the LCD monitor 180º in the open status so that it faces the
front (a subject): The LCD monitor will light white and become a light source.
To Next Page
Loading...
