Hitachi Econofresh - Page 215

Part Optional function
Indivi
dual
settin
g
Settings
Condition
setting
Description
F1
Automatic timer off setting X
00
Function not
valid
This function is used to switch off the timer
automatically when the unit has been
started by remote control.
01 1 h
02 2 h
03 3 h
04-24 (04-24) h
0A 0.5 h
0B 1.5 h
F2
Main and secondary
remote control setting
X
00 Master
This function is used when two remote
controls are installed in a system.
01 Slave
F3
Automatic temperature
setting release
X
00 Not available This function releases the fixed
temperature setting after a certain time to
limit unit operations and save energy.
01 Available
F4
Automatic release time X
00
30 minutes
(factory setting)
This function is used to set the automatic
release time with the temperature setting
01 15 minutes
02 60 minutes
03 90 minutes
F5
Automatic cooling
temperature release
X
19 19 °C
This function is used to set automatic
temperature release for the FAN/COOL/
DRY functions.
20 20 °C
21-24 (21-24) °C
25
25 °C (factory
setting)
26-28 (26-28) °C
29 29 °C
30 30 °C
F6
Automatic heating
temperature release
X
19 19 °C
This function is used to set automatic
temperature release for the HEAT
function.
20 20 °C
21-24 (21-24) °C
25
25 °C (factory
setting)
26-28 (26-28) °C
29 29 °C
30 30 °C
F7
Prevention of operation
stoppage due to remote
control operating error
X – – –
F8
Operation mode selection
interlock
X
00 Not available
This function is used to prevent changes to
the operating mode.
01
Available
(factory setting)
6 Optional functions
203
SMGB0063 rev. 1 - 10/2010
6