Hitachi HDS723020BLA642 - Table 44 Extended Status Code

Hitachi hard disk drive specifications
88
9.18.2.1.4 Extended Status Code
Status Code
Definition
0000h
Command complete without error
0001h
Invalid Function Code
0002h
Input LBA out of range
0003h
Request sector count overflow. The number of sectors requested to transfer
(Sector Count register) in the read or write log command is larger than required
by SCT command.
0004h
Invalid Function code in Error Recovery command
0005h
Invalid Selection code in Error Recovery command
0006h
Host read command timer is less than minimum value
0007h
Host write command timer is less than minimum value
0008h
Background SCT command was aborted because of an interrupting host
command
0009h
Background SCT command was terminated because of unrecoverable error
000Ah
Invalid Function code in Long Sector Access command
000Bh
SCT data transfer command was issued without first issuing an SCT command
000Ch
Invalid Function code in Feature Control command
000Dh
Invalid Feature code in Feature Control command
000Eh
Invalid New State value in Feature Control command
000Fh
Invalid Option Flags in Feature Control command
0010h
Invalid SCT Action code
0011h
Invalid Table ID (table not supported)
0012h
Command was aborted due to drive security being locked
0013h
Invalid revision code
0017h
Blocking SCT Write Same command was terminated because of unrecoverable
error
0018h-BFFFh
Reserved
C000h-C002h
Vendor Specific
C003h
Overlay switch failure in Long Sector Access command
C004h
Read Long failure
C005h
Write Long failure
C006h
Write Cache enable failure
C007h-FFEFh
Vendor Specific
FFF0h-FFFEh
Reserved
FFFFh
SCT command executing in background
Table 44 Extended Status Code