PJ-TX100W/E/U ver 1.2
10
3.3 CONTRAST RATIO
120:1 minimum 200:1 Typical (Target)
(Note) ANSI standard measurement. Vertical Lens shift: 10:0.
(A black-and-white " chessboard " pattern consisting of 16 equal rectangles)
All white, all black 720:1 Minimum, 1200:1 Typical (Target)
(Note) Vertical Lens shift: 1:1.
3.4 CIE SATURATION Brightness/Contrast at Default setting
x y
White 0.30±0.04 0.34±0.04
Red 0.65±0.04 0.345±0.04
Green 0.34±0.04 0.65±0.04
Blue 0.14±0.04 0.04±0.04
3.5 COLOR UNIFORMITY (Target) at Default setting
100% white, ANSI 9 points
Extreme Corner
∆x ±0.045, ∆y ±0.045
∆x ±0.045, ∆y ±0.045
50% white, ANSI 9 points
Extreme Corner
∆x ±0.045, ∆y ±0.045
∆x ±0.045, ∆y ±0.045
(Note) ∆x, ∆y are the difference from the center point
Brightness, Contrast; Default setting
3.6 MISCONVERGENCE, FOCUS
(1)MISCONVERGENCE
1.0 pixel maximum at the center and top left, 1.2pixel others
(Note)
Misconvergence is the distance between G crosshatch lines and the other colors crosshatch lines
(2) FOCUS SHIFTS / FOCUS UNBALANCE / Flare (Screen Size 64”)
Test Condition: Image size 70 inches, Zoom: wide, Contrast and Bright at default setting
Observing distance; 1.8 m from screen (at the projector)
Test method; Focus on the center of the image white letter E (H x W x; 5 x 3 pixels, 1 pixel gap)
on black background.
Every letter E should be resolved in whole area of the image.
To Next Page
Loading...
Need help?
General