Hitachi PSC-A64S - Page 319


Setting of control patterns
After adjusting date and time settings, the control pattern screen is displayed. Tap “Set” on the touchscreen to proceed
to the setting of control patterns.
When tapping on a control pattern button, the selected button is highlighted with an orange outline.
The procedure for the setting of control patterns is explained below.
1 Select “Group Register” on the Service Menu screen.
2 Select “Setting of control patterns” on the Group Register screen.
(1)
(2)
3 Set the Control Pattern.
When tapping on the Control Pattern button, the selected button is highlighted with an orange outline.
(4)
(3)
4 Tap “Setting completed”.
* In case of tapping “Cancel”, the screen returns to the Group Register menu.
* Group registration is deleted when changing to a different control pattern
(5)
(6)
5 Tap “OK” on the conrmation screen.
* Tap “Cancel” to return to the Setting of control patterns screen.
6 Tap “OK” on the conrmation screen to conrm the selected control pattern and to delete all group registers.
* Tap “Cancel” to conrm the selected control pattern. After modifying the control pattern, the assignment of main and
sub units is maintained as much as the control range allows.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
303
5