Hitachi RAS-8.0HNBRMQ1 - Removing Outdoor Fan Motor

126
MAINTENANCE
1.5 Removing Outdoor Fan Motor
(1) Remove the air outlet grille.
(2) Remove the upper cover.
(3) Remove the closing nut and the washer securing the propeller fan to the motor shaft with a socket
wrench. Then remove the propeller fan from the motor shaft. (If it is difcult to remove, a corrosion or
puller may be needed.)
(4) Removing Fan Motor.
(a) Remove the service cover.
(b) Disconnect the connectors for the fan motors from the outdoor unit PCB in the electrical box.
(c) Remove the spacer screws securing the fan motor.
Tool
Gloves, Phillips Screwdriver
Adjustable Wrench, Puller, Nipper
Model: 3~6.5HP
Model: 7~12HP
Upper Cover
Propeller Fan
Washer
Closing Nut
Motor Clamp
Screw with
Spacer
Fan Motor
Upper Cover
Propeller Fan
Washer
Closing Nut
Motor Clamp
Screw with
Spacer
Fan Motor