136
MAINTENANCE
1.10 Removing Electronic Expansion Valve Coil
(1) Remove the service cover, the side cover, and the rear cover.
(2) Disconnect the connector on the outdoor unit PCB.
(3) Pull the expansion valve coil upward until it slides off from valve body.
(4) To attach the new expansion valve coil, reverse the removal procedure.
Tool Phillips Screwdriver, Nipper, Band
Model: 3~3.5HP Model: 4~6.5HP
Model: 7~12HP
Pull the expansion
valve coil upward
Release Lock
Expansion Valve Coil
To Next Page
Loading...
