Hitachi RAS-8.0HNBRMQ1 - Installation Work

16
FIELD WORK INSTRUCTIONS
2.3 Installation Work
(1) Secure the outdoor unit with the anchor bolts.
In order to avoid the vibration from transmitting to the indoor by the base of the unit, the 5
～
10mm
thickness of rubber gaskets (eld supplied) should be placed under the feet of the outdoor unit, which
could decrease the vibration into the room.
a) Model:RAS-3.0~6.5HNBRKQ1 b) Model: RAS-7.0~12HNBRMQ1
(2) Installation positions of feet, air inlet and drain holes are shown in the following gures:
Model: RAS-3.0~6.5HNBRKQ1
Unit: mm
Concrete