9
INSTALLATION
1.5 Transportation
Transport the product as near to the installation location before unwrapping the package.
●
Do not put any material or stand on the product.
●
Apply two lifting wires onto the outdoor unit, when lifting it by crane.
(1) The Method of Hanging
When hanging the unit, ensure a balance of the unit, ensure the safety and lift up smoothly.
(a) Do not unwrap the package until the hanging work is nished.
(b) The hanging work can be followed the next gure:
Wire Rope
0.7m~1.0m
Apply rope
through the
square hole
Do not remove
corrugated paper
frame and plastic
band
Notes:
● Make sure the unit is in horizontal while lifting.
● Do not hook with the plastic bands.
● If the unit is lifted after unwrapping the package, protect the unit with the corner paddings or
cloth.
Attach corner padding or cloth here
CAUTION
!
To Next Page
Loading...
