¿ Installation precautions
•
Avoid installing at locations where strong winds (A) are directed towards the unit's air inlet side (B). If this is not possible,
install a wind protector (C).
• At locations where snow is frequent, place hoods, field supplied, on the air inlet and outlet areas (B and C) preventing
the wind
(A) from directly affecting the air outlet. Also, a higher base foundation should be installed in order to prevent
the accumulation of snow (D). Install the unit at a sunny location.
2 Unit installation
14
SMGB0065 rev. 1 - 12/2010
To Next Page
Loading...
