EasyManua.ls Logo

Hitachi RPK-1.0FSNSM3 - Checking Product Received

Hitachi RPK-1.0FSNSM3
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ii
P5415078-rev.3
CHECKING PRODUCT RECEIVED
l
Upon receiving this product, inspect it for any shipping damage.
Claims for damage, either apparent or concealed, should be led immediately with the shipping company.
l
Check the model number, electrical characteristics (power supply, voltage and frequency) and accessories
to determine if they are correct.
The standard utilization of the unit shall be explained in these instructions.
Therefore, the utilization of the unit other than those indicated in these instructions is not recommended.
Please contact your local agent, as the occasion arises.
HITACHI’s liability shall not cover defects arising from the alteration performed by a customer without
HITACHI’s consent in a written form.
Temperature
(
o
C)
Maximum Minimum
Cooling
Operation
Indoor 30 DB 21.5 DB
Outdoor 43 DB * -5 DB *
Heating
Operation
Indoor 25 DB 17 DB
Outdoor 15 WB * -20 WB *
DB: Dry Bulb, WB: Wet Bulb
* The temperature may change depending on the outdoor unit.
This manual should be considered as a permanent part of the air conditioning equipment and should
remain with the air conditioning equipment.
l
This heat pump air conditioner has been designed for the following temperatures. Operate the heat pump
air conditioner within this range.

Table of Contents

Related product manuals