Hitachi RPK-1.0FSNSM3 - Air Flow Direction

16
P5415078-rev.3
Table. 6.1 RPK-1.0 and RPK-1.5
6.3 Air Flow Direction
< Fixing Method >
By pressing “LOUVER” switch, the louver angle can be set as in the following tables.
Table. 6.3 RPK-2.0 to RPK-4.0
LCD Indication
Air Louver Angle
Air Louver Angle
COOL and DRY
FAN
Approx. 15
o
Approx. 22
o
Approx. 28
o
Approx. 35
o
Approx. 42
o
Approx. 48
o
Approx. 55
o
Recommended
Angle
HEAT
Approx. 25
o
Approx. 30
o
Approx. 35
o
Approx. 40
o
Approx. 45
o
Approx. 50
o
Approx. 55
o
Angle Range
Angle Range
Recommended
Angle
Air Louver Angle Approx. 15
o
Approx. 23
o
Approx. 30
o
Approx. 38
o
Approx. 45
o
Recommended
Angle
Angle Range
Auto
Swing
Step
1 2 3 4 5 6 7 -
LCD Indication
Air Louver Angle
Air Louver Angle
COOL and DRY
FAN
Approx. 15
o
Approx. 23
o
Approx. 30
o
Approx. 38
o
Approx. 45
o
Approx. 53
o
Approx. 60
o
Recommended
Angle
HEAT
Approx. 30
o
Approx. 35
o
Approx. 40
o
Approx. 45
o
Approx. 50
o
Approx. 55
o
Approx. 60
o
Angle Range
Angle Range
Recommended
Angle
Air Louver Angle Approx. 15
o
Approx. 24
o
Approx. 33
o
Approx. 41
o
Approx. 50
o
Recommended
Angle
Angle Range
Auto
Swing
Step 1 2 3 4 5
6 7
-
NOTES:
●
The louver angle indicated on the LCD and the actual louver angle do not correspond precisely with
each other during the auto-swing mode operation. When the louver is xed, set the louver angle
according to the louver position indicated on the LCD.
●
The louver may NOT stop immediately right after the switch is pressed.