Hitachi SJ300 Series

To Next Page

To Previous Page

Digital

operator

Remote Operator

setting

code

(Digital

operator)

138 Relay output terminal RYA signal selection - F-48 RELAY RYA RUN - -

The SJ300 does not have relay outputs.

Please use L300PTM (Control circuit terminal block for the

L300P).

139 Relay output terminal RYB signal selection - RELAY RYB CST - -

140 Relay output terminal RYC signal selection - RELAY RYC OTQ - -

141 Digital operator expanded function setting F14 - -

Ａ０

- -

142 O/O2 input span calibration A80 - - - C081/C083 Factory-calibrated

In the case of the SJ300, O and O2 terminal can be calibrated

independently. Zero calibration (C121/C123) is also

available.

143 OI input span calibration A81 - - - C082 Factory-calibrated Zero calibration (C122) is also available.

4.3 Carrier frequency

23/24

Other manuals for Hitachi SJ300 Series