Hitachi UX2 Series - Page 39

Chapter 3 Basic Operation
3-23
Chapter 3.
<<When performing head cleaning in the [Stop] state>>
(1) The following [Confirm] message appears. Press [Head washing].
(2) When the cleaning starts, the following screen appears.
● To stop the head cleaning, press the [Abort] button.
Press Head washing.
The set cleaning mode is displayed.
Cleaning mode
Display
Eco
Eco head washing
@Standard@
Head washing
Careful
@Careful head washing@
For details on how to change the cleaning
mode, see 11.1 in the instruction manual.