Hitachi VSP User and Reference Guide
A–8
Specifications
PDU specifications
This section contains the manufacturers specifications and diagrams for the
single and three-phase PDUs used by the VSP storage system.
DKC-F710I-200SAM 0.010 0.011 -
DKC-F710I-400S1M 0.010 0.011 -
DKC-F710I-1R6FM
3
0.017 18 watts -
DKC-F710I-3R2FM 0.018 19 watts -
Notes:
1: Maximum values when all fans rotate at maximum speed.
2: Power is consumed during the battery back-up time only.
3. Flash module drive. Estimated power consumption for a 12-drive FMU is 531 watts,
including the ENCs and power supplies.
Model Number
Heat Output
(kW)
Power
Consumption
(kVA)
Air Flow
cubic ft / cubic
meters/min)
To Next Page
Loading...
