Hitachi VM-E535LE User Manual

LOADING BATTERIES FOR CLOCK AND REMOTE CONTROL
■ Clock battery
You may want to install the lithium battery (pro¬
vided) immediately to prevent losing it.
1. Pull out the battery holder.
2. Insert the battery with the "+" terminal facing
up.
3. Fully insert the battery holder into the camera/
recorder.
NOTES:
• When replacing the battery, use 3V micro
lithium battery CR2025.
• Danger of explosion if battery is incorrectly
replaced.
This product uses the lithium battery which
contain dangerous chemicals. Handle and
dispose of with great care.
WARNING
• Keep the battery away from children and
pets. If swallowed consult a physician
immediately for emergency treatment.
• Keep the battery in a dark, cool, dry
place.
• Do not throw the battery in a fire.
• Do not short circuit the battery.
• Do not disassemble the battery.
• Do not hold the battery with the metallic
tweezers.
• Do not re-charge the battery.
• Wipe the battery with dry cloth and set
properly confirming ends (+, -).
• After use please bring back to retail
shop.
■ Remote control batteries
The remote control requires two "IEC R6" batter¬
ies.
1. Slide the cover in the direction of the arrow to
remove it.
2. Install batteries.
Be careful to install with correct polarity.
3. Re-attach the cover to the remote control.
CAUTIONS ON THE BATTERIES:
• Do not use the old and new batteries at the
same time.
• Do not mix batteries of different types.
• Do not short, take apart or dispose of batteries
by throwing them into a fire.
• When liquid leaks, wipe it off completely and
then insert new batteries.
10
ENGLISH

Hitachi VM-E535LE Specifications

General

Brand	Hitachi
Model	VM-E535LE
Category	Camcorder
Language	English