Hitachi VM-E535LE - Date Recording Options; Automatic Date Recording Modes; Title and Date Recording

DATE RECORDING _
When the date has been set, the camera/recorder will enter the automatic date recording mode auto¬
matically.
1. Press the red button on the CAM/OFF/VIDEO Date - Date recording
switch as you slide it to "CAM". The camera/recorder records the date with the
2. Press the DATE/DISP. button to specify the picture all the time,
date display you want to record.
" © AUTO" and date - Automatic date record¬
ing
This option records the date automatically
once a day at the beginning of recording for 10
seconds.
No display - No date recording
The camera/recorder does not record the date.
NOTES:
• The camera/recorder records the same date
when:
- the cassette is replaced.
- you select "©AUTO" and date display
again.
- the recording is less than 10 seconds
long.
• If the date changes while recording con¬
tinues over 10 seconds, the new date is
recorded for about 10 seconds the next time
you make a recording.
"© TITLE" and date - Automatic title and
date recording
This option records the date and created title
(see "TITLE RECORDING" on page 32) auto¬
matically once a day at the beginning of
recording for 10 seconds.
NOTE: When "©TITLE" is displayed in the
viewfinder or LCD monitor, the title cannot be
turned on or off using the remote control.
20
Date and time - Date and time recording
The camera/recorder records the date and
time with the picture all the time.
3. P ress the start/stop button.
Recording will start.
NOTES:
• When "©AUTO" and date display selected,
the date disappears about 10 seconds after
recoding is started.
• When " © TITLE" and date is selected, the title
and date disappear about 10 seconds after
recording is started.
ENGLISH