Hitachi VM-E535LE - Additional Power Options; Car Battery Operation; Battery Status Check

■ WHEN USING WITH THE CAR BATTERY (By using optional car battery cord)
1. Connect one end of the DC cord (provided) to
the camera/recorder, as illustrated.
2. Connect the other end of the DC cord to DC
OUTPUT of the car battery cord.
3. Connect the car battery cord to the car's ciga¬
rette lighter socket.
NOTES:
• The car battery cord is designed to be used
only with automobiles having a 12/24-volt
negative ground system.
• To prevent fire or shock hazard or damage to
your camera/recorder, please use only the
specified car battery cord.
CHECKING THE BATTERY PACK
When the camera/recorder is turned on, the bat¬
tery level indicator "a" is displayed in the
viewfinder or LCD monitor indicating the con¬
dition of camera/recording battery.
NOTES:
• When the "mm" indication appears in the
viewfinder or LCD monitor and flashes while
the camera/recorder is operated with a battery
pack (provided), it indicates that the battery is
insufficiently charged. Charge the battery
pack or replace it with a charged battery pack.
• The battery charge indicator does not appear
when the camcorder is powered by the AC
adapter/charger.
Battery's charge
12
ENGLISH