Hitachi VM-E535LE - Title Recording and Lens Accessories; Recording Titles to Tape or VCR; Attaching Tele;Wide Converters

ENGLISH
■ Recording a title on a tape in the camera/
recorder
1. Slide the CAM/OFF/VIDEO switch to "VIDEO".
2. Locate the position on the tape that you wish
to record the title.
3. Slide CAM/OFFA/IDEO switch to "CAM".
4. Press the TITLE ON/OFF button on the remote
control to display the title graphics.
5. Press the Start/Stop button to start the title re¬
cording.
6. Press the TITLE ON/OFF button on the remote
control to remove the title graphics from the
viewfinder or LCD monitor.
The camera/recorder will now record as nor¬
mal.
■ Recording a title on another VCR while play¬
ing a tape back with the camera/recorder
1. Connect the camera/recorder and VCR.
(See page 37.)
2. Set the VCR in the recording mode and cam¬
era/recorder in the playback mode.
3. Press the TITLE ON/OFF button on the remote
control when you see the scene where you
want to record the title.
4. Press the TITLE ON/OFF button on the remote
control to erase the display from the
viewfinder or LCD monitor.
ATTACHING THE TELE OR WIDE CONVERTER
Screw the lens into the threads on the front of
video camera/recorder lens assembly.
33