Hitachi VM-E535LE - Advanced Recording Techniques; Fade-in and Fade-out Operations; Quick Edit Functionality

@ Black-and-White Fade (fading in/out, from/to a black-and-white picture)
■ FADE-IN
1. Press the FADE button before recording to
select the fade mode.
2. Press the Start/Stop button to start recording.
• The picture fades in automatically and
recording starts.
■ FADE-OUT
1. While the camera/recorder is recording, press
the FADE button to select the fade mode.
2. Press the Start/Stop button to stop recording.
• The_ picture fades out automatically and
"REC" flashes until the fade ends then
recording stops.
NOTE: When fading out be sure to wait until the
PAUSE indicator (• II) is visible in the viewfinder
or LCD monitor before attempting to put the
camera/recorder into the record mode again.
QUICK EDIT
The quick edit feature allows you to search for the
end of previously recorded material, or find a par¬
ticular spot on your tape, to begin your editing, or
recording new material. Quick edit is used while
the camera/recorder is in the record/pause
(stand-by) mode. By holding down the F.FWD,
REW/REVIEW or PLAY button you can visually
search or play your tape. Releasing the buttons
(F.FWD, REW/REVIEW or PLAY) immediately
stops the tape at that position.
28
ENGLISH