Hitachi VM-E535LE - Specific Digital Effects; Negative;Positive and Mosaic Effects; X130 Digital Zoom and Half-Mirror Effects

■ Negative/positive recording
1. Place the camera/recorder in record pause.
2. Repeatedly press the D.EFFECT button until
"NEGPOS" appears in the viewfinder or LCD
monitor.
The image in the viewfinder or LCD monitor
will become negative.
Normal Mode Negative/Positive Mode
3. P ress the start/stop button to start recording.
• To release the negative mode, press the
D.EFFECT button repeatedly in recording
pause until normal mode is restored.
■ XI30 digital zoom recording
1. Place the camera/recorder in record pause.
2. Repeatedly press the D.EFFECT button until
"ZM:2" appears in the viewfinder or LCD
monitor.
3. Slide and hold the power zoom control to the
"T" side until you reach your desired magnifi¬
cation.
4. Press the start/stop button to start recording.
• To release the X130 digital zoom mode,
press the D.EFFECT button repeatedly in
recording pause until normal mode is
restored.
■ Half-mirror recording
1. Place the camera/recorder in record pause.
2. Repeatedly press the D.EFFECT button until
"MIRROR" appears in the viewfinder or LCD
monitor.
The image in the viewfinder or LCD monitor
will change to a symmetric image on the left
and right, obtained by placing a mirror at the
center of the screen.
3. P ress the start/stop button to start recording.
• To release the half-mirror mode, press the
D.EFFECT button repeatedly in recording
pause until normal mode is restored.
NOTE: This function cannot be used with digital
zoom, instant zoom, image stabilizer or zoom
fade function.
■ Mosaic recording
1. Place the camera/recorder in record pause.
2. Repeatedly press the D.EFFECT button until
"MOSAIC" appears in the viewfinder or LCD
monitor.
The image in the viewfinder or LCD monitor
will be in mosaic.
Normal Mode Mosaic Mode
3. P r ess the start/stop button to start recording.
• To release the mosaic mode, press the
D.EFFECT button repeatedly in recording
pause until normal mode is restored.
NOTE: This function cannot be used with digital
zoom, instant zoom, image stabilizer or zoom
fade function.
26
ENGLISH