Hitachi YUTAKI M R32 Series - Removing the; Removing the Rear Cover

107
PMML0600 rev.0 - 06/2022
8
YUTAKI M R32 AND YUTAKI HYDROSPLIT R32
MAINTENANCE
8.1.1.3 Removing the front cover
1 Remove the upper cover as explained in “8.1.1.2 Removing the upper cover”
2 Remove the service cover as explained in “8.1.1.1 Removing the service cover”
3 To remove the front cover remove 7 xing screws and 3 le nails.
1
2
1- Front cover
2- Nails
! CAUTION
Pay attention of no falling o the front cover.
8.1.1.4 Removing the rear cover
1 Remove the 8 screws xing the rear cover: 2 screws at the right side and 6 screws at the rea
side.
1
1- Rear cover