Hitachi YUTAKI M R32 Series - Removing the Indoor Unit Service Cover; Yutaki H

112
PMML0600 rev.0 - 06/2022
8
YUTAKI H
MAINTENANCE
8.2 YUTAKI H
If it is necessary to access to the indoor unit components, please follow these operations.
8.2.1 Removing the indoor unit service cover
 NOTE
The indoor unit service cover needs to be removed for any task inside the indoor unit.
1 Remove the screws which x the service cover.
(x2) Both sides
2 Slide the service cover slightly upward and remove it pulling to back.
! CAUTION
• Pay attention of no falling o the service cover.
• Take care when removing service cover; the parts inside the unit could be hot.