Hitachi YUTAKI M R32 Series - Removing the Indoor Unit Covers; YUTAKI H Combi

117
PMML0600 rev.0 - 06/2022
8
YUTAKI H COMBI
MAINTENANCE
8.3 YUTAKI H Combi
If it is necessary to access to the indoor unit components, please follow these operations.
8.3.1 Removing the indoor unit covers
 NOTE
• Front cover needs to be removed for any task inside the indoor unit.
• Back, le and right covers do not need to be removed.
◆ Removing the indoor unit front cover
1 Remove the 2 screws of the indoor unit front cover.
2 Slide the service cover slightly upward and remove it pulling to back.
! CAUTION
• Pay attention of no falling o the service cover.
• Take care when removing service cover; the parts inside the unit could be hot.