10. Electrical wiring
TCGB0075 rev.0 - 11/2012
122
DSW2: Piping length/selection function
Function Setting position
Setting before shipment
Piping length
5 m < Lt
5 m < Lt < 30 m
Cancellation of outdoor hot start control.
(Not recommended, only available for special testing cases)
Cancellation of outdoor air temperature control. (No change)
Optional function selection setting
(set by PSW)
External input/output selection signals (set by PSW)
C A U T I O N
It is possible to select the cancellation of the outdoor hot start control by pushing both PSW1 & PSW3 simul-
taneouslyduring3seconds.Thecancellationoftheoutdoorhotstartcontrolcongurationcoulddamagethe
compressor if it is usually used. In that case the unit warranty will be voided.
DSW3: Capacity setting
Unit Setting position Unit Setting position
RAS-4HVRNME -AF
RAS-4HRNME-AF
RAS-5HVRNME -AF RAS-5HRNME -AF
RAS-6HVRNME-AF RAS-6HRNME -AF
To Next Page
Loading...
