2. Features and benets
TCGB0075 rev.0 - 11/2012
36
Domestic hot water tank (optional accessory)
The domestic hot water tank is an accessory supplied by HITACHI which allows the domestic hot water production, with
the following characteristics:
DHWS195S-2.0H1E DHWS260S-2.0H1E
Combination exibility
There exist the possibility to install the tank integrated over the indoor unit o beside it.
Stainless steel tank
Tank models are made in Stainless steel chemically descaled and passivated.
Efciency thermal insulation
Thermally insulated with rigid, mould-injected, in Neopor EPS in grey color.
High efciency tank
Optimum design of the heat exchanger coil to provide the maximum domestic hot water production capacity to the system.
Compact size and reduced installation space
Elimination of cold zones at the bottom of the storage tank to prevent the risk of bacteria proliferation (e.g. legionella).
Anodic protection
Anodic protection installed with 200g aluminium anode (which it not has to be replaced) and load measured on the front
panel.
Electric heater integrated
Standard factory supplied 2.0kW immersion electric heater element tted into the side sealed gasket.
LCD and manometer integrated
LCD and manometer are easily accessible from the front side of tank, protected by the LCD user’s interface cover.
To Next Page
Loading...
