HITEC PMAC 3000 - Graphical User Interface (Gui)



PMAC 3000 Page21
themanufacturer’srecommendationsforthegivenpack.Otherpacksmaynotbesuitablefor
theinternalchargerandmaybedangerous.

GraphicalUserInterface(GUI)
ThePMAC3000hasa USBconnectorontherearpanel.SeeFigure1.TheUSBconnectorisa
USB2.0TypeBconnector,andshouldbeusedwiththeprovidedUSB2.0compatiblecable.

Includedwiththe PMAC3000isalsoaCDcontainingaGraphicalUserInterface(GUI)program.
ThisprogramisrequiredtoreadpeaksandplotsfromthePMAC3000andstorethemtoafile.
Inaddition,itisalsohandyinthatitmakeseasyworkofmodifyingthePMAC3000settings.

Toinstallthe softwareandUSB driver,inserttheCD intotheCDor DVDdriveonthePC.The
programUSB_DnA.exe shouldstartbyitself.Ifitdoesn’t,browsetheCDandstarttheprogram
manually.

Oncerunning,theuserwillseethescreenshowninFigure21.



Figure21–USBDriverandApplicationInstaller


ClickontheViewInstallationInstructionsbutton.ThisisaPDFfileandwillrequireaPDFviewer
to view.Follow the installation instructions in the PDF  to install the USB drivers and the
application.