User Manual Safety Instructions
EM1 Series AC Servo Motors EM1-01-0-EN-2110-MA Page 12 of 72
3.3.1.2 Conversions and modifications
Warning! Risk of Personal Injury or Damage to Property.
Conversions or modifications to the AC servo motors are prohibited.
3.3.2 Personnel requirements
Caution! Art und Quelle der Warnung
Only authorized and competent persons may carry out work on the AC servo motor
components. They must be familiar with the safety equipment and regulations before starting
work (See Chapter 3.3.2.1 Protective Equipment)
Table 3.1: Personnel Requirements
Activity Qualification
Commissioning Trained specialist personnel of the operator or manufacturer
Normal Operation Trained personnel
Cleaning Trained personnel
Maintenance Trained specialist personnel of the operator or manufacturer
Repairs Trained specialist personnel of the operator or manufacturer
3.3.2.1 Protective Equipment
Table 3.2: Personal Protective Equipment
Operating Phase Personal Protective Equipment
Normal Operation
When in the vicinity of the AC servo motor systems, the following
personal protective equipment is required:
Safety shoes
Protective helmet
Protective gloves
Cleaning
When cleaning the AC servo motor systems, the following personal
protective equipment is required:
Safety shoes
Protective helmet
Protective gloves
Protective goggles
Maintenance
When carrying out maintenance and repairs, the following personal
protective equipment is required:
Safety shoes
Protective helmet
Protective gloves
3.3.2.2 Storage
Attention! Risk of Damage to Property.
Follow the precautions of AC servo motor storage conditions.
Do not store the product in an inflammable environment or with chemical agents.
Do not store the product in a place with humidity, dust, harmful gases or liquids.
Storage conditions must comply with EN 60721-3-1 (Refer to Table 3.3)
To Next Page
Loading...
Need help?
General
