21637-A-03-09 13
DE
GB
F
NL
9.4 CYCLE COUNTER
Push Program button
➁
again.
The display will show alternately "P" or the number of wash cycles.
In the lower Display
➄
appears the value up to 999.
Thousands will be shown in the upper Display ➅.
Example: 1023 wash cycles
Max. indication:
999 999
9.5 WATER CONSUMPTION COUNTER
Push Program button
➁
again.
The display will show alternately "E" or the water consumption (liter).
In the lower Display
➄
appears the value up to 999 liter.
Thousands will be shown in the upper Display ➅.
Example: 10217 liter
Max. indication:
999 999
9.6 REMAINING WATER QUANTITY COUNTER
FOR EXTERNAL WATER TREATMENT
Only available if activated in service mode (S18). The capacity
(liter) of the water treatment has to be stored via C79/80.
Push Program button
➁
again.
The display will show alternately "d" and/or the remaining water quantity
(liter).
In the lower Display
➄
appears the value up to 999 liter.
Thousands will be shown in the upper Display ➅.
Example: 1586 liter
Max. indication:
999 999
To reset the counter to pre-set value, push and hold (3 seconds) the
ON/OFF button
➀
.
9.7 ACTIVATION / DEACTIVATION OF ACOUSTIC SIGNALS
Close the door.
In the upper Display
➅
appears "SF1".
Push Program button
➁
repeatedly, until "S" is displayed.
By pushing the ON/OFF button
➀
acoustic signals can be
activated / deactivated.
The lower Display
➄
shows "I" (activated) or "0" (deactivated).
–
–
–
–
–
–
–
–
–
–
SETTINGS AND COUNTER VALUES
To Next Page
Loading...
