Hobart Handler 190 - Serial Number and Rating Label Location; Selecting a Location

TM-260 273 Page 9Handler 190
3-7. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
1 Line Disconnect Device
Locate unit near correct input power
supply.
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
3-8. Selecting A Location
1
18 in
(460 mm)
18 in
(460 mm)
Location And Airflow
260 711-B / ST-139 445-E
! Do not move or operate unit
where it could tip.