Need help?Do you have a question about the Hobart Handler 190 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Amperage Output | 25-190 A |
| Weldable Materials | Steel, Stainless Steel, Aluminum |
| Weight | 68 lbs |
| Spool Size Capacity | 4 or 8 inch |
| Input Current | 20 A |
| Input Frequency | 60 Hz |
| Processes | MIG (GMAW), Flux-Cored (FCAW) |
| Input Phase | Single Phase |
| Duty Cycle | 30% at 130 A |
| Material Thickness | 24 ga. - 5/16 in. (Steel) |
| Wire Size Range | 0.023-0.035 in (0.6-0.9 mm) solid, 0.030-0.045 in (0.8-1.2 mm) flux-cored |
To Next Page
