Gas
09-10
External socket for gas *
The external socket for gas is used to connect external gas
devices such as a gas barbecue or lamp.
The plug connection can only be hitched when the emer-
gency shuto valve has been closed. Push back the clutch
sleeve to undo the safety latch.
The operating pressure of the device to be connected
must be 30 mbar (1 bar = 14.5 PSI). Maximum perfor-
mance of devices to be connected: 1.5 kW
The external socket for gas is only suitable for extracting
gas, not for supplying gas to the system.
The coupling valve has been constructed in such a way that
the emergency shuto valve can only be opened if a plug con-
nection has been used to hitch the coupling. When hitching,
the plug connection is plugged into the safety coupling.
When unhitched, use the protective cap to shut the opening
of the valve.
To Next Page
Loading...
