Built-in devices
10-22
• Press the adjustable knob
j
. Gas will ow to the burner
and the ignition
k
will light the ame.
• Keep pressing the adjustable knob
j
for 10 seconds until
the ignition safety valve keeps the gas supply open.
• Let go of the adjusting knob
j
and turn it to the desired
temperature. The ame must burn steadily. The
colour should be mainly blue and the ame should have a
clear outline.
• After approx. one minutes, carefully close the oven door so
that the ame does not go out.
• If it has not ignited, repeat this procedure from step 1.
• Should the ame on the burner accidentally be extin-
guished, turn the switch back to the neutral position
and leave the burner o for at least one minute before
igniting it again.
Turning o the oven
• Turn the adjustable knob
j
to the zero position.
• Close the main shuto valve on the gas bottle and the gas
shuto spigot marked “oven”.
10.6 Fume Hood *
The built-in fan blows kitchen odours directly outside.
Clean the lter of the fume hood regularly, as it collects
fat from kitchen odours.
j
Light
k
To switch on
l
To set the speed for the fan
1 2 3
To Next Page
Loading...
