Built-in devices
10-16
• The refrigerator runs without a thermostatic control (con-
tinuous operation). 12 V operation should, therefore, only
serve to maintain a temperature which has already been
achieved.
• To turn the refrigerator o turn the energy selector switch
to the O position
m
.
230 V operation
• Turn the energy selector switch to mains
k
.
• Use the thermostat
o
to regulate the temperature. No
absolute temperature values have been assigned to the
temperature levels.
• To turn the refrigerator o turn the energy selector switch
to the O position
m
.
Gas operation
• Turn the energy selector switch to gas operation
l
.
• Open the main stop valve on the gas cylinder and the
“Refrigerator” gas stop valve.
• Turn the thermostat
o
to the highest setting and keep it
pressed down. The refrigerator either ignites automatically
or by pushing the button for manual ignition several times
(model-specic).
• If gas operation has been activated, then the indicator in
the control window will move into the green zone
n
.
Only release the button when the the indicator is in the
green zone.
• Use the thermostat
o
to regulate the cooling capacity.
No absolute temperature values have been assigned to
the temperature levels.
• To turn the refrigerator o turn the energy selector switch
to the O position
m
• Close the main stop valve on the gas cylinder and the
“Refrigerator” gas stop valve.
It is not permitted to operate the refrigerator with gas
- at petrol stations
- while driving
- while the vehicle is being transported by means of a transport
or towing vehicle.
This may cause a re.
• Food should always be stored in closed containers,
aluminium foil or similar materials.
• Never store heated food in the refrigerator; always let it
cool o rst.
Storing food