Interior Structure
06-18
Access ladder
Ladders are used to access alcoves, upper bunk beds and
beds at the rear end of the mobile home (model-specic).
• Hook the upper end of the ladder rmly into the handle
provided or behind the metal rail (model-specic).
• Place the ladder rmly on the oor.
Alcove Bed, Mechanical (model-specic)
To operate
• If necessary, remove the backs and head rests from the
seating bench.
• Switch o the lighting underneath the alcove bed.
• Release the lock for the alcove bed by pressing both parts
of the handle
j
together.
• Continue to press both parts of the handle together as you
pull the alcove bed down as far as it will go.
• Hand the ladder
k
in the handle.
• When sleeping, always clip the netting that protects you
from falling out
l
into place (located underneath the
mattress).
Ensure that the ladder cannot slip.
1
2
1
1
2
3
4
To Next Page
Loading...
