Hobby Van Vantana 2016 - 230 V System Fuse Protection

7. Electrical Installations
101
The van's engine must be turned o before the 230V
mainsconnectionishookedup.
OnlyplugsandcordsthatcomplywithCEEstandards
maybeused.
To disconnect the electric connection:
• Switchotheautomaticcircuitbreaker
j
bypressingthe
rockerswitchdown
k
.
•RemovetheCEEplug
m
(p. 100) .
• Pressthecoverap
k
oftheexternalsocket(see also p.
41)
downuntilitclicksintoplace.
1
The230Vsystemisprotectedbyatwo-pole13Aautomaticcir-
cuitbreaker
j
, which is located in the seat chest in the seating
arrangement.Itcanbeaccessedviathesidecompartment.
Fuse protection for the 230V system
2
Automatic circuit breaker with FI ('fast interrupt') switch