Hobby Van Vantana 2016 - Automatic Transmission Operation

3. Chassis
26
3.6 Automatic transmission *
As an option, your van can be equipped with an automatic
transmission(Comfort-Matic)whichhastwomethodsofope-
ration:MANUAL/gearshiftandAUTO(MATIC).Sincetheclutch
is engaged and released by means of an electro-hydraulic unit
that is controlled by the transmission‘s control unit, the clutch
pedalissuperuousand,therefore,ithasbeenremoved.Both
the selected method of operation as well as the gear you are
driving in are shown on the multifunction display panel.
FIAT Comfort-Matic
Thegearshiftleveronthedashboardhasthreexedpositions:
− thecentrepositionforselectingtheforwardgear,
− Nforselectingtheneutralposition(engineisidle),
− Rforselectingthereversegear.
Starting from the centre position, which corresponds to the
forward gear, the lever can be moved as follows:
− forwards (- position) to select a lower gear (i.e.  shifting
down),
− backwards(+position)toselectahighergear,
− to the left (A/M position) to select automatic or manual
mode, alternatively.
Thesethreepositionsarenotxed,i.e.aftertheleverhasbeen
moved it jumps back to the centre position.
Manual operation
This method of operation allows the driver to select a suitable
gear according to the conditions under which the vehicle is
beingdriven.Switchgearsasfollows:
• Move the lever in the direction of (+) to shift up or in the
direction of (-) to shift down. Do not let go of the gas pedal
while you are shifting gears.
The system will only allow you to shift when such an action
will not prevent the motor or the transmission from functioning
correctly. As soon as the motor reaches idle speed, the system
will automatically shift down (e.g. when braking).
Automatic operation
The lever must be pressed in the direction of A/M in order to
switchautomaticoperationonoro.Thesystemautomatically
shifts gears on the basis of the vehicle‘s speed, the engine rpm
and the position of the gas pedal. If necessary, the system will
shift down one or more gears when you press the gas pedal to
theoorboard.This will provide you with the requiredperfor-
mance and torque to achieve the acceleration you require.