9. Gas132
To operate
j
Open the valve on the bottle.
k
Press rmly on the hose rupture protection (green button)
on the high-pressure hose.
l
If necessary (e.g. after it has been newly mounted or
the gas bottle accidentally hits against the gas pressure
regulator system) press the green reset button on the
MonoControl CS (resets the crash sensor activation
element).
1
2
3
Gas regulator with a crash sensor *
Using the MonoControl CS respectively DuoControl CS, it is
possible to heat the vehicle even while driving.
Should there be an accident, the integrated crash sensor au-
tomatically interrupts the gas supply, thereby preventing gas
from escaping.
(Eect of delay 3.5 g ± 0.5 g; this corresponds to an impact
speed of 15-20 km/h against a xed obstacle.)