10. Built-in devices146
Warning
A warning icon appears to signal a warning that one of the ope-
rating parameters has reached an undened status. In this case,
the device in question will continue to operate. As soon as the
operating parameter is once again within its specied range of
values, the icon will disappear.
The reset function resets the control
panel to the manufacturer's default
setting. It deletes all of the settings you
have made.
Conrming the reset
- Press the adjusting knob / pushbutton
Resetting to manufacturer's default setting (RESET)
The icon signals that the 230V mains
voltage (charging current) is available.
Display: 230V mains voltage
This can only be displayed in connection with a Combi E CP plus
heating system that includes additional heating rods for electric
operation (optional extra).
To Next Page
Loading...
