Hobby Van Vantana 2016 - Page 53

6. Interior Structure52
Rearranging the cushions K55
To convert
• Remove the table (see 6.4 Tables).
• Pull the seating bench and cushions apart at the end towards
the entrance (see 6.11 Seats in the superstructure).
• Hook the additional panel
j
into the lower guide rail
k
• Turn the driver's seat 180° (see 6.10 Seats in the driver's
cab).
• Place the additional cushion
l
on the additional panel.
1
2
3
Rearranging the cushions K60(T) and K65(T)
To convert
• Hook the table
j
into the lower guiding rail
k
(see 6.4 Tables).
• Pull the seating bench and cushions apart at the end towards
the entrance (see 6.11 Seats in the superstructure).
• Turn the driver's seat 180° (see 6.10 Seats in the driver's
cab).
• Place the additional cushion
l
on the table.
21
3