6. Interior Structure 59
Fully adjustable window stays
Opening
• Turn all latches
j
by 90°.
• Press the window latch outwards with your hand until it is
open as far as you would like. Then use your other hand to
tighten the turn screw
k
until you feel the resistance and
the window is held in place.
Closing
• Loosen the turn screw
k
to allow you to shut the window.
• Turn all latches back to their original position so that they
clasp behind the brackets and pull the pane into the seal.
1
2
Closing
• Raise the window slightly so that the hook unlocks.
• Close the window.
• Turn the latch
k
to the original position so that it clasps behind
the brackets and pull the pane into the seal.
Fully adjustable window stays
To Next Page
Loading...
