Hobie Wave User Manual

23
hobie.com
Rudder Operation
The rudders are locked
in the “down” position
by pushing on the tiller
arm.
To raise the rudder, pull
up on the tiller arm.
1
2
If you want to keep the
rudder in the “up”
position for transport,
install the pin through
the rudder and housing.
Remove the pin before
lowering.
3
Assembly Required

Hobie Wave Specifications

General

Length	13 ft / 3.96 m
Beam	7 ft / 2.13 m
Hull Material	Polyethylene
Type	Catamaran
Capacity	4 adults
Mast Length	20 ft / 6.10 m