To Next PageTo Next Page
Need help?Do you have a question about the Hoffmann Megaplan Megaspin and is the answer not in the manual?
General| Brand | Hoffmann |
|---|---|
| Model | Megaplan Megaspin |
| Category | Wheel Balancers |
| Language | English |
Guide to selecting the appropriate mode for unbalance correction.
Performing unbalance measurement using the first set of buttons.
Performing unbalance measurement using the second set of buttons.
Detailed steps for correcting unbalance on iron rims.
Specific instructions for unbalance correction on iron rims.
Specific instructions for unbalance correction on aluminium rims.
Process for optimising tyre and rim unbalance for reduced vibration.
Function for balancing all wheels of a vehicle for optimal performance.
Overview of the wheel analysis functions.
Accessing restricted setup options for technical service.
Procedure for calibrating the laser system.
Calibration procedure for the CC motor.
Resetting the spindle parameters.
Calibration procedure for the taper measurement system.
Area for technical service with password protection.
Procedure for updating the machine's firmware.
Restoring factory default settings for the machine.
Steps for calibrating the entire machine.
Running self-diagnostic tests on the machine.
