68
Use and Maintenance Manual
ENGLISH
8.3.6 Wheel runout
Decreases the value
Increases the value
Confirms the default parameters
Goes back to the reserved setup screen
Return to main screen
Wheel first harmonic limit: represents the first harmonic limit beyond which it is considered
appropriate to turn the tyre on the rim by 180°. Recommended limit =
1.2 mm.
Rim first harmonic limit: represents the first harmonic limit of the rim below which it is not
considered appropriate to turn the tyre on the rim.
Recommended limit = 0.3 mm.
Minimum correction limit: represents the minimum correction limit obtainable below which it is not
considered appropriate to turn the tyre on the rim. Recommended limit =
0.8 mm.
Default parameter setting: resets the default machine settings.
Reserved Setup
To Next Page
Loading...